Hybrid Inverters, Inverters
SRNE 5KW/48V/80A Solar Hybrid Inverter_ HFP4850S80 ( 500v) _Parallel
230Vac/48Vdc/5KW/145Voc Parallel with up to 6 units
HF Series is a new hybrid solar charge inverter, which integrates PV charge &Grid(Generator) charge with AC sine wave output.
Adopting DPS control algorithm, getting higher response speed, higher reliability, and higher industrial standard.
Rated Power: 5000Watts
Peak Power: 10000VA
Loaded motor capability: 4HP
Max Solar: 4200Watts
Max Solar Current: 80A
PV input : 145V
Max AC Charging: 60A
₦744,000.00
Compare Support1. It adopts full-digital dual closed loop control, combined with advanced SPWM technology to output pure sine wave.
2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority, and PV&Mains Electricity hybrid charging.
4. Advanced MPPT technology with 99.9% efficiency.
5. User-defined charging parameters setting(voltage, current, and mode), and suitable for various types of energy storage batteries.
6. Rocker switch for AC output control.
7. Power saving mode, reduce no-load loss.
8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
9. Lithium battery activation function allows lead-acid and lithium battery access.
10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection, and reverse polarity protection.
11. Support a variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB, etc., and feasible to connect with computer and mobile phone to realize remote control.
12. Available for 6 units of parallel operation.
Models | HFP4850S80 |
AC mode | |
Rated input voltage | 220/230Vac |
Input voltage range | (170Vac~280Vac) ±2%/(90Vac-280Vac)±2% |
Frequency | 50Hz/ 60Hz (auto-sensing) |
Parallel connection
Frequency Range |
Available for 6 units parallel connection
47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz); |
Overload/short circuit protection | Breaker |
Efficiency | >95% |
Conversion time (bypass and inverter) | 10ms (Typical value) |
AC reverse protection | yes |
Maximum bypass overload current | 40A |
Inverting mode | |
Output voltage waveform | Pure sine wave |
Rated output power(VA) | 5000 |
Rated output power(W) | 5000 |
Power factor | 1 |
Rated output voltage (Vac) | 230Vac |
Output voltage error | ±5% |
Output frequency range (Hz) | 50Hz ± 0.3Hz/60Hz ± 0.3Hz |
Efficiency | >90% |
Overload protection |
(102%<load<125%) ±10%:=”” reporting=”” error=”” and=”” turn=”” off=”” the=”” output=”” after=”” 5=”” minutes<=”” span=””> (125%<load<150%) ±10%:=”” reporting=”” error=”” and=”” turn=”” off=”” the=”” output=”” after=”” 10=”” seconds<=”” span=””>; Load>150% ±10%: reporting error and turn off the output after 5 seconds;</load<150%)></load<125%)> |
Peak power | 10000VA |
Loaded motor capacity | 4HP |
Output short-circuit protection | Breaker |
Specification of bypass breaker | 40A |
Rated battery input voltage | 48V (minimum start voltage 44V) |
Battery voltage range | 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm/turnoff voltage/overvoltage alarm/overvoltage restoration…settable LCD screen) |
Power saving mode
AC charge |
Load ≤25W |
Battery type | Lead acid or lithium battery |
Maximum charge current | 60A |
Charge current error | ± 5Adc |
Charge voltage range | 40 –58Vdc |
Short-circuit protection | Circuit breaker and blown fuse |
Breaker specification | 40A |
Overcharge protection | Alarm and turn off charging after 1 minute |
Solar charge | |
Maximum PV opencircuit voltage | 500Vdc |
PV operation voltage range | 500Vdc |
MPPT voltage range | 60-115Vdc |
Battery voltage range | 40-60Vdc |
Maximum output power | 4200W |
Charge current range of solar energy (settable) | 0-80A |
Charge short-circuit protection | Blown fuse |
Wiring protection
Authentication specification |
Reverse polarity protection |
Specification authentication | CE(IEC/EN62109-1,-2)、ROHS2.0 |
EMC authentication grade | EN61000 |
Operation temperature range | -15°C to 55°C |
Storage temperature range | -25°C ~ 60°C |
Humidity range | 5% to 95% (Conformal coating protection) |
Noise | ≤60dB |
Thermal dissipation | Forced air cooling, variable speed of fan |
Communication interface | USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control |
Dimension (L*W*D) | 430mm*338mm*126mm |
Weight (kg) | 10 |
There are no reviews yet.